format - format a PC floppy diskette
format [-v] device [media-size [drive-size]]
Format allows a user with read-write permission to device to format a
floppy. Either one of the special floppy devices must be used, see
fd(4), or an automatic device may be used with the size of the floppy
specified on the command line. Two sizes must be given when formatting a
low density diskette in a high density drive. For example:
format /dev/fd1 1200
format /dev/fd1 360 1200
The first two commands format a 1.2M diskette, the last formats a 360k
diskette in a 1.2M drive. A 1.44M drive knows when it's dealing with a
low density floppy, so all these commands format a 720k diskette:
format /dev/fd0 720
format /dev/fd0 720 1440
No sizes may be specified when using a special floppy device, a size must
be specified when using an automatic device.
-v Verify the process by reading each track after formatting it.
Formatting is normally blind, the controller has no idea whether it
succeeds or not. Use -v on a new box of cheap diskettes, or on a
diskette that may have gone bad. Verifying will increase formatting
time by 50%.
Numbers will be printed on standard output to show that it is busy. The
locations of bad sectors are printed on standard error when verifying.
The exit code is zero unless there are too many bad spots.
Kees J. Bot (firstname.lastname@example.org)